The edge banding machine can perform linear edge banding, trimming and polishing on furniture boards with high accuracy and efficiency, but many people ignore the maintenance of the edge banding machine in the process of using the edge banding machine.
Although the maintenance of the edge banding machine may consume a certain amount of manpower and material resources, it can prolong the service life of the edge banding machine and improve the work efficiency, so the maintenance of the edge banding machine is very important. Next, I will introduce you to the four major aspects of the maintenance of the edge banding machine.
1. Regular cleaning
First of all, it is necessary to clean up the wood chips and various wood debris generated in the production process of the edge banding machine to prevent the machine from being stuck due to the accumulation of wood, which affects the normal use of the edge banding machine. Neat and prevent harmful substances from causing corrosion damage to the surface of the edge-sealing body.
2. Lubricate the edge banding machine regularly.
The bearings of each part of the edge banding machine should be lubricated with lubricating oil on a regular basis, and appropriate lubricant must be selected, otherwise it will also affect the normal use of the edge banding machine
3. Regular inspection.
Regularly inspect and maintain the edge banding machine. During the maintenance process, carefully check some wear conditions of the gears, bearings and other parts of the edge banding machine, and replace the severely worn parts in time.
4. The edge banding machine computer system maintenance
Most of today’s edge banding machines are connected to the computer, so as to realize the automatic operation of computer programming. If there is a problem with the computer system, it will also affect the normal use of the machine.
5.The guide rail of the edge banding machine should be cleaned every 40 hours.
Add No. 46 guide oil to the sliding surface of the edge banding machine or the oil filling hole of the edge banding machine! Oil-water separator for edge banding. Fill the edge banding oil cup with low-viscosity air compressor oil to two-thirds of the oil cup. The main drive motor of the edge banding machine has to check the new gear oil machine every two months. No need to add. The drive gear under the plastic box of the edge banding machine should be inspected and cleaned every 40 hours, and high-viscosity grease should be added.
